Vegetable Shapes Cutter/Vegetable Slicing Machine/Cube Cutting Machine
|FOB Price:||US $999 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $999/ Piece|
|Production Capacity:||150-660 Kg/H|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: GGYQ-A
- Voltage: 220V
- Customized: Customized
- Capacity: 150-660 Kg/H
- Net Weight: 140 Kg
- Trademark: XD
- Specification: CE ISO
- HS Code: 84385
- Type: Cutter
- Power: 1.5KW
- Model: Ggyq-a
- Cutting Thickness: 1-10 mm
- Dimension: 900*460*740 mm
- Transport Package: Wooden Case
- Origin: Shandong, China
Kelp cutters thick stainless steel plate material used, the use of food grade conveyor belt, so kelp processors use more health, safety, security.
Using the Operation
1. Before the first working test cut, cut vegetables to observe the specifications and requirements specifications are the same, or should adjust the length of the slice thickness or vegetable, the normal work to meet the requirements.
2. Install vertical knife
Smart Shredder 2.1 installed vertical knife: the vertical knife set knife on board, the lower edge is parallel with the fixed contact blades, fixed blades on the turret pin fastening nut cutter, you can remove the fixed blades .
2.2 Other shredder installation, vertical knife: After the first rotation adjustable eccentric, so turret line to the lower dead point, and then lifted up 1/2 mm turret so that the vertical blade contact with the conveyor belt, the fastening nut the vertical blade fastened to the turret. Description: Overhead Lift height master of their own based on the cut vegetables. If the overhead lift height is small, there may not even vegetable knife, if the overhead lift height is too large, it is possible to cut bad conveyor belt.
3. chopping length adjustment: control the length of the value observed on the display panel and length requirements are consistent growth by increasing the length of time the button, press the down button to reduce the length of time.
Other Shredder adjustment: Turn the adjustable eccentric, loosen the screws fastening rod, cut filaments movable fulcrum, from outside to inside; movable fulcrum cut thick wire, from the inside out, tighten the adjustment after a good tune screws.